How do you maintain a macerator?

Category: food and drink cooking
4.1/5 (1,216 Views . 41 Votes)
Pour 1-2.5 litres of Toilet Cleaner & Macerator Descaler into the toilet bowl. Turn the macerator pump on for a few seconds to allow the descaler to enter the macerator. Turn the macerator off again and allow to work for 2 hours. Do not flush the toilet during this time.



Then, how do you fix a Saniflo macerator?

The first thing you can try is removing any blockage from the macerator or water tank. If that doesn't work, then the block is probably within the waste pipe. You will need a certified Saniflo engineer to remove and clean out your pipes. Ensure they install the pipes at a 45-degree angle.

Secondly, how often should you use saniflo descaler? It is recommended that Saniflo Descaler is used for up to 3-4 times per year depending on water hardness in your area. Most of our work is in London and the water is seriously hard in some places. So we ourselves recommend you descale a Saniflo 3 times per year.

Also, how do I stop my macerator from smelling?

If the macerator is in a bathroom put your nose near the plug hole of a bath, basin or shower to see if that is the smell you are talking about. If they don't smell and the macerator hasn't been descaled then it you should try descaling the macerator pump. you may need to descale it a few times for best results.

Can I use bleach in a Saniflo toilet?

Small amounts of bleach or other cleaner, used occasionally, will partly clean a SANIFLO unit, but will not do so as thoroughly as the branded SANIFLO product. The other issue arises when attempting to descale the unit, which must be done regularly in hard water areas in particular.

36 Related Question Answers Found

Can you poop in a Saniflo toilet?

DO NOT FLUSH ANYTHING EXCEPT WEE, POO AND SMALL AMOUNTS OF TOILET PAPER DOWN A SANIFLO!!!

Can you plunge a macerator toilet?

A macerator grinds solid waste into small enough particles that it can travel through your other waste pipes. Because of this, if you get a clog or blockage in your Saniflo, you cannot simply plunge the toilet to unblock it or you may damage the macerator. Instead, take apart the system and manually clean it.

Do Macerators smell?

Why does my Saniflo smell? Bad smells can be due to a build-up of limescale and human waste in the 2-3 inches of water that's always left in the Saniflo. To see if it's your Sanilfo that's emitting the bad smell, flush your toilet or fill your basin with water and then unplug it.

Do Macerators need servicing?

The macerator does not require any special maintenance; however, to ensure many years of good service, we recommend that you clean and descale your macerator regularly. Saniflo descaler is designed to remove scale while preserving the internal workings of your device.

How long do macerating toilets last?

between 10 to 15 years

How do you clean a Saniflo macerator?

Pour 1-2.5 litres of Toilet Cleaner & Macerator Descaler into the toilet bowl. Turn the macerator pump on for a few seconds to allow the descaler to enter the macerator. Turn the macerator off again and allow to work for 2 hours. Do not flush the toilet during this time.

How long do Macerators last?

The general rule about macerators, is that the machine is an added 2nd toilet and is only built good enough for small amount of traffic, which should at least last for up to 15 years depending on the use. In an average used home as a main bathroom, then you would expect a macerator to last about 10 years.

Why does my saniflo keeps running?

My Saniflo Won't Switch On Off Or Keeps Running On
There are a few factors which can cause this problem, a blockage, a damaged membrane, a missing non return valve or a broken switch, this is repairable. If it's not blocked it's best to change the switch and the membrane as they both control start – stop.

Can a macerator pump uphill?

Waste not…
Then came macerators or 'lifting stations', which carry out the messy task of moving solid matter uphill or along horizontal pipes. They do this by macerating the waste into small pieces and pumping the dirty water away.

How does a macerator toilet work?

A macerating toilet is an upflush toilet system. It sends waste to a unit behind the toilet in a large container or in a container in the wall. High-powered blades liquefy the waste before it is pumped out of the unit through a pipe that is directly tied to the main drain line.

How good is saniflo?

Saniflo systems are environment-friendly with comparatively low water consumption; as little as one gallon per flush. 8. At the time of installation, Saniflo doesn't make much noise and can sit right on top of any floor. The system is also quiet.

Can saniflo pump upwards?

When the WC is flushed the unit automatically activates to pump waste horizontally to a remote soil pipe up to 50 metres away. Saniflo will also discharge vertically up to 4 metres maximum, or a lesser combination of vertical and horizontal pipe run.

How much does a macerating toilet cost?

Lots of people are turning to Saniflo bathroom products as a way to bring down the cost of the average bathroom installation – which can run from between $10,000 - $25,000! Much of that cost is associated with demolition and new plumbing, which Saniflo bathroom products do not require.

Do macerating toilets work well?

Because that drain line is below the level of the toilet, gravity pulls the contents of the waste line into it. It's the same with sinks and tubs. Many units have additional inlets to hook up a sink (kitchen sinks are not recommended), shower, or tub. Macerating toilets are safe to use with septic systems.

How do I clean my Sani flush toilet?

How to Clean an Upflush Toilet
  1. Turn off the power to the upflush toilet's macerator. Depending on the model and manufacturer, the macerator's power is generally shut off through a switch somewhere on the box itself, which is found directly behind the toilet.
  2. Pour two to three cups nonacidic toilet bowl cleaner down the toilet.
  3. Turn the macerator on.

How do you use a Saniflo toilet?

A basic walk-through of the process is:
Waste goes to the Saniflo or WasteAway unit when the toilet is flushed, instead of directly to an outflow pipe. The macerator technology then kicks into action. A blade spins at up to 3,600 rpm to pulverise waste into liquid in a matter of just seconds.