How do you hide exposed radiator pipes?

Read on as we show you ten cheap but interesting ways to cover your exposed pipes.

Go retro.
Add Decorative Wood Pipe Wrapping.
Other Pole and Pipe Coverings.
Use modular blocks.
Build a bookshelf around and/or in front of your pipes.
Use plants to conceal unsightly pipes and other exposed items you want to hide.

Hereof, how do you hide exposed central heating pipes?

You can box in the pipes Boxing in is the most popular way of concealing radiator pipes. You can achieve this feat by constructing a box around the pipework starting from the wood to the plasterboard covering all pipes along the line. It could be in a kitchen, a bathroom or even a living room.

Beside above, can you hide radiator pipes in wall? Hi, you can chase the pipes into the wall. (gives you the ability to sqare up those walls, you'll love that when you come to do the tiling) There are no regs about burying hot cold or heating in walls, just gas! However isolating valves are required.

Subsequently, one may also ask, can central heating pipes be chased into walls?

Chasing heating pipes into walls is not the work of a professional. Yes you will get cracks plus the heat will get drawn into the wall making it nice and warm.

How do you hide surface mounted pipes?

Whenever you have exposed pipes that are on a finished wall, you will find that the best way that you will be able to conceal the pipes is with a wooden box. A wooden box will work best whenever the pipes are grouped together in one location. If there are several pipes spaced out, a box will not be able to be used.

33 Related Question Answers Found

What is a cable rebate?

Cable (Small) Rebated

Select Cable rebated for a rebate height of 20mm. The depth of the rebate is determined by the depth of the board. This size of rebate will normally accommodate existing wires that run around the parameter of your room.

How do you make exposed pipes look good?

Read on as we show you ten cheap but interesting ways to cover your exposed pipes.

Go retro.
Add Decorative Wood Pipe Wrapping.
Other Pole and Pipe Coverings.
Use modular blocks.
Build a bookshelf around and/or in front of your pipes.
Use plants to conceal unsightly pipes and other exposed items you want to hide.

Where do radiator pipes go?

The flow pipes are connected to one end of the manifold in a number of radiators, and then return to the other end. But both the feed and return microbore pipes are connected to the same end of the radiator.

How can I hide PVC pipe outside?

How to Hide Exterior Plumbing Pipes

Use Plants. One of the most popular ways to disguise exposed exterior pipes is to use plants.
Use a Wooden Box. A wooden box is a great option for pipes grouped together.
Use Decorative Objects.
Paint the Pipe.
Cover the Pipe.
Industrialize the Pipe.
Now You Know.

How can I hide my boiler pipes?

One convenient way to hide your unattractive boiler pipes is to hang some fabric or a small curtain in front of them. This way the pipes will not only be easily accessible in case of a malfunction, but you will also not see them whenever you visit this particular room.

Can I bury water pipes in a wall?

Remember the water regs you are NOT ALLOWED to bury potable water pipes in walls or concrete. They must be contained within another plastic pipe so that they can be replaced without having to dig them out!

How do you find plastic pipes in walls?

there are many ways to do that. Just let the water run through the pipe and use a big, long screwdriver as a sound probe. Firmly press the tip of the screwdriver into the wall, and also firmly press the handle against your ear, best results are achieved if the tool is kept orthogonal to your head.

Can gas pipes be chased into walls?

Try to run vertical pipes in walls in ducts, with access if possible, never inside the cavity. If the wall is thick enough to provide proper cover the pipe can be run in a chase. If tube has to be installed in purpose-designed ducts, these must be sealed to prevent the passage of gas into the wall cavity.

How do water pipes run through walls?

Cut a hole with some wiggle room for the new pipe. For a 3-inch pipe, use a drill and reciprocating saw to cut a hole about 4-1/4 inches by 10 inches through both the bottom plate of the room you are working in and the top plate of the room below. Cut away a 10-inch by 2-foot section of flooring.

How do you hide bathroom waste pipes?

How to Hide Plumbing Pipes in your Bathroom

Bathroom furniture. Bathroom furniture such as vanity units and cistern units, provide a simple yet effective way to hide the plumbing pipes in your bathroom.
Choose a pedestal basin.
Conceal pipes in the wall.
Fit a wall hung toilet.
Build a fake wall.

How can I hide my shower pipes?

The easiest way to conceal the pipework for a shower or indeed for a toilet, towel rail, basin, radiator or any other appliance you want to use in the bathroom, is to build a false wall in front of the existing wall and hide the pipes behind it.

Where are pipes in walls?

Plumbing generally is up/down or straight right/left. Copper tubing is something to be wary of. In walls they lie directly above where the stubout or angle valve is (supply). Remember if you have to drill you really don't need to go deep usually.

How do you hide ceiling pipes?

Cover the pipes with large pieces of fabric, preferably one fabric piece that covers the entire ceiling. Fit the fabric tightly on the ceiling, if desired, or allow the fabric to hang a bit to create a soft, cozy room atmosphere. Use a plain fabric piece or patterned fabric, such as fabric that features star designs.

Can you box in gas pipes?

yes you can box a gas pipe in, if the boxing is over 0.01m2 then you will need to vent it with the correct size ventilation. If you want the pipework altered then get a local Registered Gas Engineer to give you a quote for the work.

Can you cover gas pipes?

Gas pipes must be protected and tested before covering. Protection can be provided by covering with PVC sleeving. Gas pipes must be accessable for inspection if compression fittings are used to join them. There must 50mm between a gas pipe and any other metalic service - i.e. cables.

How do you remove a pipe clip?

The old clips can be removed by unhinging the cover,prise the pipe away from the clip and extract clip with pump pliers with a robust pulling/twisting/bending action.

Can you plaster over pipes?

You should sleeve the pipe in a larger tube to allow for expansion and contraction. The chase should be deep enough that you can plaster over the sleeving before tiling. If you don't sleeve and the pipe is too close to the surface you'll pop tiles off in due course.