How do you fix a loose handle on a Moen faucet?

VIDEO

Moreover, how do you remove a screwless faucet handle?

With the water shut off from the shut-off valves remove the handles. To do this you must locate a screw that is usually hidden beneath a decorative cap. Gently pry the cap off with a metal nail-file or flathead screwdriver. With the screw exposed unscrew it and lift off the handle.

Furthermore, how do you tighten a loose faucet? Slide the tip of a flat-head screwdriver under the edge of the cap. Lift gently with the screwdriver to remove the cap from the faucet handle. Tighten the setscrew -- located under the cap -- clockwise to tighten the handle. Push the decorative cap over the opening when the handle is tight.

Likewise, how do you remove a Moen faucet handle?

Some Moen faucets have handles that remove by loosening the screw in the back of the handle. To loosen this screw use a 3/32" hex wrench. After the handle has been removed unscrew the spout collar nut by turning counterclockwise then lift and rotate the spout.

How do you remove a Moen faucet handle without screws?

Use an Allen wrench or small screwdriver to remove the screw, then carefully use your hand or pliers to remove the handle of the faucet. The overall trick is how to remove tap handle without screw and find a good place to begin taking apart the faucet handle so you can get to where you need to be.

20 Related Question Answers Found

Why does my faucet handle turn all the way around?

The faucet known as the seat-washer is typically the most common, and can be discovered by turning your handle. If the handle turns all the way around, then it is a seat-washer stem faucet. Other types will only turn around one quarter of the circle.

How do you adjust a bathroom faucet handle?

How to Adjust Faucet Handles

Ensure that the faucet is turned off and that no dripping is present.
Remove the decorative cap from the top of the faucet handle.
Remove the handle retaining screw with a Phillips screwdriver.
Lift the handle up and off from the faucet stem.
Reset the handle in the desired position.

How do I change the O rings on my Moen faucet?

Shut off the water to the faucet beneath the sink.
Examine the handle of the faucet where the O-ring is located.
Use the appropriately-sized hex wrench to remove the hex screw holding the faucet handle in place.
Pull the old O-ring off of the valve body, and discard it.

How do I stop my Moen kitchen faucet from leaking?

Begin Moen Kitchen Faucet Repair by Disassembling the Faucet

Turn off the water valves under the sink and open the faucet to relieve water pressure. Locate the screw cap on the faucet handle and pry it off with a flat-head screwdriver to reveal the set screw holding on the handle. The cap usually bears the Moen logo.

Are Moen faucets guaranteed for life?

Warranty for Moen Branded Bath Accessories

Limited Lifetime Warranty - If this product fails due to a defect in materials or workmanship at any time during the life of the product, Moen will replace it free of charge, postage-paid. Simply contact Moen at 1-800-BUY-MOEN for replacement information.

Why is my Moen faucet leaking?

There are generally two causes of water leaking from your Moen faucet. Because pull-out spray faucets have a single handle, the most common cause of the water leaking is the O-ring. Remove the handle by pulling straight up and exposing the cartridge body and O-ring. Remove the O-ring and replace it with a new one.