How do you fix a burner that won't light?

Asked By: Elur Masli | Last Updated: 5th February, 2020
Category: home and garden home appliances
4.3/5 (149 Views . 44 Votes)
Soak the sealed burner base in vinegar or warm water and use a stiff brush to remove any debris. Finally, clean any remaining debris out of the burner holes with a toothpick, sewing needle or compressed air. Reinstall the burner, cover and the grill, and try igniting the burner once more.

Click to see full answer


Also asked, how do you fix a burner on a gas stove?

You can fix this problem quickly so that your range passes with flying colors.

  1. Access the gas valve behind the stove.
  2. Locate the malfunctioning igniter on the stove.
  3. Rub a toothbrush across the malfunctioning ignitor to remove any residue.
  4. Insert a needle into the ignitor's pilot hole, if equipped.

Furthermore, how much does it cost to replace an oven igniter? Screws might need replacement. The igniter may also need to be replaced; igniters typically cost between $40 and $80. Ask your repair person about the cost of parts before you agree to any repairs.

Also to know is, why is my stove not clicking?

One of the most common reasons a gas stove starts clicking is because the burner cap is out of alignment. Once the cooktop is completely cool, remove the burner grate to access the cap beneath it. Remove the cap and re-center it on the base. Try lighting the burner again.

What does a thermocouple look like?

The thermocouple looks like a piece of metal tubing smaller than a soda straw. To find it, first locate the gas control box. This is the box that the main gas line enters, where you turn the gas on in the furnace. The other end of the thermocouple sits in the flame of the pilot light.

22 Related Question Answers Found

How do you clean a thermocouple?

Remove Thermocouple from pilot assembly, using steel wool or emery cloth to lightly clean the tip removing any soot or build up that might have accorded due to an improper pilot flame. Using an eraser from a pencil; clean the threads of the nut that connects the Thermocouple to the control valve and then re-tighten.

Why does my gas burner keep going out?

The most common cause of this is dirty or blocked burners, which is the part that you can easily take off to clean. All the small holes on the burner should be clean and clear, if not then even a partial blockage can lead to the thermocouple not getting enough heat and, the burner won't stay lit.

Why does my gas oven keep clicking?

Clicks and ticks
When it's normal: Gas stoves use igniters to light the oven and burners. The igniter makes a clicking sound when it generates a spark and lights the burner. During normal operation, the igniter stops clicking when the oven or burner lights. Once the water evaporates, your oven should function properly.

How much does it cost to replace a burner on a glass top stove?

Average Price for a Stovetop or Cooktop Repair
According to HomeAdvisor, the average price for any repair on your oven range will tend to run from $50 to $200.

Why would an oven stop working?


Power Failure. If your oven won't heat at all, the most likely problem is a blown fuse or a burnt out element. If it has also stopped working, it's safe to assume the oven is not getting electricity. Check your circuit breaker box and reset the breaker if necessary and see if this fixes the problem.

When should I replace my stove?

When Should I Replace My Stove? The average lifespan of a stove is usually 13-15 years, and a gas range will last a couple years longer than an electric one. Making sure your stove is in excellent working condition is important because of the element of fire.

How do you test an electric stove switch?

Set the infinite switch on high and place your ohmmeter on the L2, H2, P and H1 terminals to check for continuity.
  1. If there is no continuity between L1 and H1 or between L2 and H2, the infinite switch is defective.
  2. If there is no continuity between P and H1, the indicator light circuit is defective.

Why does my stove top igniter keeps clicking?

The spark switch initiates ignition by sending an electric current to the spark module. The switch may get shorted due to moisture, electricity upsurge or various other reasons. A damaged ignition switch may begin to send a continuous current to the spark module, causing it to click continuously.

Why is my igniter not working?

Make sure that the igniter is making a clicking noise when you press the igniter button. If it doesn't click, then the wires may not be connected properly, the battery may be dead or installed incorrectly, or the igniter module may have failed.

How do you fix a stove?


Before you open your wallet and call a professional to repair your oven:
  1. Reset your “time cook” function if your oven has one.
  2. Make sure the stove is plugged in and you have power to the outlet.
  3. Check the gas stove ignition fuse (Photo 1).
  4. Check the pilot, if your oven has one (Photo 2).