How do you cover a vinyl chair?

Asked By: Zobida Batlles | Last Updated: 3rd February, 2020
Category: hobbies and interests woodworking
4.9/5 (32 Views . 11 Votes)
A staple gun is an essential tool for reupholstering vinyl chairs.
  1. Flip the chair upside down to determine how the seat is held in place.
  2. Remove any other vinyl-covered areas from the chair using the appropriate tool, as in Step 1.
  3. Remove the staples holding the vinyl onto the seat or seat back, using a staple remover.

Click to see full answer

Also, how do you cover vinyl chairs?

How to Reupholster Vinyl Chairs

  1. Flip the chair upside down to determine how the seat is held in place.
  2. Remove any other vinyl-covered areas from the chair using the appropriate tool, as in Step 1.
  3. Remove the staples holding the vinyl onto the seat or seat back, using a staple remover.
  4. Place the new vinyl face down on a clean work surface.

One may also ask, how much does it cost to reupholster a chair? The total cost to reupholster a chair can range from $500 to $3,500 nationwide. For the relatively simple job of reupholstering a dining room chair seat with only a cushion, the job can cost as little as $50. For the more complex job of reupholstering a large recliner with ornate details, it can ring in over $600.

Beside above, how do you cover a chair?

  1. Gather Supplies and Remove Seat Cushion. Remove seat cushion from chair frame and original fabric from cushion.
  2. Trace and Cut Off Old Chair Lining.
  3. Staple Lining to Cushion Frame.
  4. Trim Fabric Lining.
  5. Trace and Cut Fabric.
  6. Staple Fabric to Cushion Frame.
  7. Attach Fabric at Chair Corners.
  8. Reattach Seat Cushion to Chair Frame.

How do you reupholster a non removable chair seat?

How to Upholster a Non-Removable Chair Seat

  1. Remove the old cover using a small pry bar, flat screwdriver and pliers.
  2. Center the new fabric over the cushion material.
  3. Trim the batting along the edge of the wood using a sharp utility knife.
  4. Tack or staple the center of each side the same way.
  5. Cut the fabric carefully along the wood edge and away from the tacks.

38 Related Question Answers Found

Can I spray paint vinyl chairs?

Vinyl is plastic. Therefore, spray paint that specifically adheres to plastic should work for this project. Fabric spray paint is more flexible than any other spray paint, but it is more expensive. This DIY project is done with plastic-adhering spray paint.

How much fabric do I need to recover a chair?

If your chair is larger than average, measure the width the same way as you would measure the length at its widest point. If you have more than one chair that you are reupholstering, multiply the number of chairs by 0.75 and divide by 2. This will give you the total amount of yardage you will need for your chairs.

How thick should foam be for dining room chairs?

The ultimate use of the furniture will determine how thick the foam should be. Dining room chairs as an example would typically prefer a medium soft foam (2.8 rating) but if you're after extra comfort then you could always go much softer than that if you like.

How do you use a chair cover as a sheet?

  1. Measure your chair from the floor on one side up and over the arm of the chair to the seat.
  2. Cut a fitted sheet in half crosswise.
  3. Place the two sheet halves printed side down over the arms of the chair so that the cut sides are dangling down the outsides of the chair arms.

What is the best fabric to reupholster dining chairs?

A smooth synthetic fabric designed to resist liquids and staining is a better choice for a dining chair than, say, chenille or a velour material, which may attract pet hair or random fibers and dust. Ultrasuede-style materials designed to look like real suede also resist spills while providing durability.

Should I reupholster or buy new?

Reupholstery can be a great way to give furniture you love a new life. It tends to cost more than buying new, so it's better for pieces that have special value. If you have an antique chair with a great frame, or a modern couch with a single torn cushion, reupholstery might be a wise decision.

How do you turn a wood chair into an upholstered chair?

  1. Make a cardboard template for the chair back.
  2. Cut out the foam.
  3. Attach the hardboard to the back of the chair using the appropriately sized screws for the thickness of your wood and chair.
  4. Using spray adhesive, attach the foam to the hardboard on the chair back.
  5. Layout the marks for tufting.

How do you restore boat vinyl?

  1. Clean surface using 39362 SEM SOAP, and a gray scuff pad. Rinse with water or damp, clean cloth and dry.
  2. Re-clean surface using 38343 VINYL PREP. Remove using a damp, lint free cloth.
  3. Spray Marine VINYL COAT using 2-3 light coats. Allow 10 minutes between coats. Full cure takes 24 hours. Vinyl Coat Technical Data Sheet.

How much does it cost to reupholster a boat seat?

Vinyl fabrics are mostly used in marine upholstery, costs about $40 to $60 per square yard. A sample upholstery job for layback seats using existing hardware and seat box estimate costs between $600 and $1200 each.

How do you reupholster boat seats without sewing?

How to reupholster boat seats without sewing the covers
  1. What you will need:
  2. Step 1: Measure up your vinyl and foam.
  3. Step 2: Buy the right sized vinyl and foam.
  4. Step 3: Lay your new marine vinyl flat.
  5. Step 4: Use the old vinyl as a template to cut the new.
  6. Step 5: Place the foam and seat base onto the vinyl.

Can you reupholster over existing fabric?

When reupholstering an old piece, Verdi says, you might be able to salvage the old batting if it's been kept in a temperate, dry location (like your parents' house). So long as the old fabric isn't darker than your new fabric, you can even upholster right over it.

How do you upholster?

While upholstering a chair of this type you will learn to:
  1. Use upholstery tools.
  2. Tear down.
  3. Tie Springs.
  4. Pad up your project.
  5. Measure and cut fabric.
  6. Center your fabric.
  7. Attach your fabric.
  8. Add cording.

How do you upholster a round seat?

Here's how you can cover your own round seats: Cut out a circle of fabric 3-4 inches larger than the seat. Place the fabric right side down on your work surface, then lay the pad and wood seat on top of that. All three layers should be front side down.