How do you adjust the tension on a shower curtain rod?

Asked By: Devinder Reble | Last Updated: 27th February, 2020
Category: sports fishing sports
4.3/5 (19 Views . 41 Votes)
Hold the rod in place with the curtain about an inch off the floor, then twist the smaller rod counterclockwise to lengthen it. Keep twisting after both ends have made contact with the walls until the rod has enough tension to stay in place.

Click to see full answer


Considering this, how do you adjust a tension rod?

Locate the point where the two sections of the tension rod fit together. Tension rods have two interlocking shafts with a strong spring inside. Place one hand on either side of the spot where the rods connect and twist counterclockwise to lengthen the tension rod or clockwise to shorten it.

Similarly, how do you collapse a tension rod? How to Loosen a Tension Rod

  1. Position yourself in front of the tension rod so that the smaller dimension side is on your right.
  2. Place your left hand on the thicker part of the rod to hold the rod when it loosens as the rod will drop if there is a curtain attached to the rod.
  3. Place your right hand on the thinner part of the rod.

Beside above, how do I keep my tension rod from falling down?

Felt furniture pads. First, adjust your shower curtain to be a few inches longer than the shower. Hang the shower curtain rod at an angle, with one end several inches higher than you want it. Slowly slide that end down until the rod is hanging straight. The felt pads keep it from sliding futher down the tile wall.

How much weight can a tension rod hold?

22 pounds

34 Related Question Answers Found

Can tension rods hold curtains?

Tension rods work well when you need to hang a curtain at a window that won't accommodate installing a standard rod. However, you can also use them to hang sheers inside the window frame underneath curtains. You can hang just about any type of curtain on a tension rod.

What size tension rods do I need?

The tension rod length varies by drum, you want enough tension rod in the sleeve to not wreck the threads under tension, but not so much that you can't tighten it properly. I think the standard rule of thumb is you need at least 1-1.5cm (roughly 1/2") in the sleeve of the lug.

What is the longest tension rod you can buy?

It features a screw-out length adjustment and easily adjusts from 84" to 120".
  • This adjustable tension curtain rod is easy to use.
  • Simply rotate the two sections of the rod in opposite directions to make the curtain rod longer or shorter.
  • Adjusts from 84" to 120" in length.
  • The rod measures 1" in diameter.

How do you keep a shower rod from falling down?

Easy Fix Falling Shower Rod:
  1. Buy a small package of 1″ Self Adhesive Felt Pads- (48 ct. sells for $3 at Big Lots)
  2. Peel of the backing and stick one on either sides of the tile wall where your rod will go.
  3. Have the rubber ends of your rod go to each felt pad.
  4. Tighten your rod and enjoy the silence.

Can you put two tension rods together?


The In-Tension Rod Joiner allows you to combine multipe In-Tension rods for wider windows. One-year warranty. Use one Joiner and two 30" - 52" In-Tension Rods to achieve a width of 90" - 104".

How do you use a curtain tension rod?

Method 1 Installing a Tension Rod
  1. Measure the space between 2 facing surfaces.
  2. Purchase a rod that's longer than your measurement.
  3. Push the tension rod through a curtain, if desired.
  4. Twist both ends of the tension rod to unlock it.
  5. Slide the tension rod between the 2 walls and let it expand.

Do tension shower rods work on tile?

You don't need to drill holes in your bathroom or damage your tiles. These tension rods work on most surfaces – tile, wallpaper, wood, smooth walls, and more. The spring-loaded tension keeps them steady and in place.

What is the best tension shower rod?

The 4 Best Tension Shower Rods
  1. The Overall Best, All Things Considered. BRIOFOX Tension Shower Rod. $40. $27.99. |
  2. The Most Affordable. AmazonBasics Tension Rod. $12.67. |
  3. The Best Double Rod (Which Is Great For Reducing Mildew!) Zenna Home Aluminum Double Tension Shower Curtain Rod. $39.99. |
  4. The Best Curved Rod. Moen Curved Tension Shower Rod. $51.85. $45.49.

Can you hang clothes on a tension rod?

YES! YES! * Curtains, drapes, clothes, room dividers, etc,shower curtain rod,curtain rods. HEAVY DUTY: Tension rods can bear 20pounds,It is your blackout window curtain rod but also your shower tension rod and laundry clothes drying rack.

How does a tension shower rod work?


Wedge the tension rod into place, making sure to hold one end over the mark on one side of the shower while compressing the rod onto the other mark on the opposite side. Once the rod is in place, adjust it accordingly.

How do you put a shower rod back together?

Tension Rods
  1. Measure the distance between the two walls where the shower rod must be mounted with a tape measure.
  2. Unscrew the rod by turning each end in an opposite direction so the rod opens or extends.
  3. Hold the shower curtain against one wall directly above the tub's apron or exposed edge as a guide.

How do you hang a curtain rod on tile?

  1. Clean the tile thoroughly, then discreetly mark where you wish to install the bar.
  2. Mark the spots where the mounting bracket for the shower curtain rod will be affixed to the shower wall.
  3. Drill the holes for the mounting brackets.
  4. Screw the mounting brackets into place.

How do I stop my shower caddy from falling?

Get suction cup hooks
If your shower caddy was hanging from the shower, a good alternative is to get a shower caddy to stick through suction hooks. These easily attach to the side of your wall and will secure your caddy, so it doesn't fall.

How can I make my shower rod longer?


How to Extend Shower Curtain Poles
  1. Tip the narrow end of the shower curtain pole down and shake the pole.
  2. Hold the rod in front of you with your right hand on the narrow end and your left hand on the wider portion of the rod.
  3. Twist the wider (left-hand) portion of the rod away from you to expand the rod.

What is a tension rod on a car?

Tension rods are used in coil spring front suspension systems. They hold the front wheels in place, preventing longitudinal motion. One end of the tension rod runs from the chassis to the wheel area on each side of the car. The other end is bolted firmly in place on the control arm or wheel knuckle.

Where should shower curtain rod be placed?

For best fit, shower curtain should be 6" - 12" wider than shower rod. Mount rod approximately 3" inside the point a straight rod is normally mounted. The midpoint of the rod should extend several inches past the outside rim of the tub. Depending upon tub model, mount rod between 6" and 8" from center line of the tub.