How do you adjust the airflow on a gas fireplace?

Insert a flat-blade screwdriver into the setscrew on the right side of the valve and twist counterclockwise to increase the gas-to-air ratio. Turn the setscrew clockwise to reduce air flow mixing with gas. Ask a friend to describe the flame color and intensity in your Heat-n-Glo fireplace to help with your adjustments.

Keeping this in consideration, how do I increase gas flow in my fireplace?

Turn the key valve counterclockwise as far as it will turn to open the gas line. Start the fire by following your gas fireplace lighting instructions. Turn the gas control knob to high to increase the flames in your fireplace if applicable.

Secondly, how do I know if my gas fireplace is working? When inspecting a gas burning fireplace check to make sure the glass is secure and free of cracks. Turn the gas off at the shut off valve and check to see that the igniter is properly sparking. Once you are complete, turn the gas valve back on and start the fireplace.

Also asked, how do you adjust the flame color on a gas fireplace?

To adjust the color of the flames so there is a soft yellow tip at the top of the flames, the gas adjustment should be left alone and the air input reduced by partially closing the air shutter located at the end of the burner.

What should a gas fireplace flame look like?

The burner flames from your natural gas furnace should look blue or almost completely blue. A healthy natural gas furnace flame is characterized by a roaring blue flame with a light blue triangle in its center. There may be a tiny tip of yellow.

29 Related Question Answers Found

Can a pilot light flame be adjusted?

Adjusting the Pilot Flame

If the pilot flame is too small, you may be able to make it larger by turning the pilot adjustment screw on the valve control counterclockwise with a screwdriver to open it. The cause of a weak flame may also be an obstruction in the pilot tube.

Why is my gas fireplace flame so low?

Typically low flame height is caused by one of three things. Either you have low gas pressure at the fireplace or you need to restrict the venting to slow down the draft. 1) It is common to think that the gas pressure is fine when this only one appliance on the line or the meter is turned all the way up.

Can you adjust the flame on a gas fireplace?

Yes and No. Many fireplaces today do allow you to adjust the height of the flame in one of two ways: Some gas fireplaces include a handheld remote control that will allow you to adjust the flame height. Turning this knob will increase / decrease the height of the flame.

Why is my gas fireplace not lighting?

Pilot light systems are the most common reason gas fireplaces fail to light, so check the main gas valve to make sure the gas is turned on. It should usually run parallel to the gas line when it is on. The pilot lights, but not staying lit, indicates that the thermocouple is worn out or bad.

What Colour flame is dangerous?

Yellow or red flames only burn at around 1,000 degrees C. This flame is dangerous as it produces more poisonous carbon monoxide gas.

Is it safe to run a gas fireplace all day?

There is no time limit built into the safety requirements for vented gas fireplaces. Gas fireplaces literally run for days when being safety tested. However, unvented gas fireplaces (aka vent free, ventless) can adversely affect indoor air quality and shouldn't be used more than a few hours at a stretch.

What color should flame be in propane fireplace?

Flame Color Temperature Chart

Gas	Flame Color	Temperature Chart
LPG (Propane)	Blue Flame	1,980°C
Natural Gas (Methane Gas)	Blue Flame	1,960°C
LPG or Natural Gas	Yellow or Red Flames	1,000 °C
Temperatures are approximate. Blue flame temperatures assume complete combustion.

What does a blue flame mean in a gas fireplace?

A blue flame indicates that the burner is providing an air-fuel mix with sufficient oxygen for complete combustion right out of the nozzle. The flame burns the fuel completely to carbon dioxide and water. The other set of burners were adjusted to produce a yellow flame, designed to look like a wood fire.

What is the hottest flame color?

The hottest flame is violet on the color spectrum and white in the visible spectrum. The type of fuel and impurities, in addition to the flame temperature, contribute to the color of the flame. Once the gas forms, combustion occurs as the various molecules react with oxygen to produce the heat and light known as fire.

Should gas fireplace flames Be Blue?

A gas fire blue flame when the fire is initially turned on is quite normal. If your gas fire is blue with orange tips this is also quite acceptable as it's often temporary due to dust in air particles, or a possible lack of oxygen. Colours of flames in gas fires may range from a yellow gas flame, through orange to red.

Why do flames turn blue?

Blue Flames Indicate Temperatures of 2,300 to 3,000 Degrees

Along with the complete burning of carbon, this is why gas-burning fires typically have a blue flame. They heat up more quickly and to higher temperatures than fires using other fuel sources, resulting in a blue flame.

Why is a blue flame preferred over a yellow?

Combustion is incomplete and less energy is transferred. A blue flame from a Bunsen burner transfers more energy than a yellow Bunsen flame as complete combustion gives a blue flame. This is because a yellow flame produces a lot of soot.

What Colour flame is carbon monoxide?

Gas flames burning orange or yellow instead of blue may indicate the presence of carbon monoxide.

Can I use flexible gas line for fireplace?

In general, no flex gas line or copper tubing should come in direct contact with heat or flame. You should also note if the gas line penetraton is sealed or not. If the gas burner is ventfree, you would need to determine if that factory built fireplace is tested and listed for use with VF.

When should gas fireplace logs be replaced?

However, embers do fade over time and will periodically need to be replaced. Embers can last up to five years depending on how frequently you use your fireplace. We have found that replacing embers every three years keeps a log set looking brilliant.

Do gas fireplaces need to be serviced?

The initial and foremost guideline of any gas fireplace system is to have it inspected every year. With professional chimney companies, you can usually have your annual chimney cleaning and gas inspection scheduled at the same time. Matter of fact, your whole system should be inspected annually, top to bottom.

What is the fake wood in a gas fireplace?

Fake gas fireplace logs are made of ceramic or a similar material. These absorb high amounts of heat without being damaged. Without them, most of the heat from the burning gas would just escape out the vent. By retaining more heat, the ceramic provides warmth and comfort for your home.