How do I reset the code on my Samsung dishwasher?

Category: home and garden home appliances
5/5 (7,041 Views . 13 Votes)
Quick answer: The LC flashing on your Samsung dishwasher indicates that the leak sensor in the dishwasher detects a water leak or moisture. To clear the error code LC, simply remove power to the dishwasher for 15 minutes. This should reset the dishwasher and clear the error code.

Likewise, how do I reset my Samsung dishwasher?

If the reset does not work after removing power from the dishwasher, then the next thing to try is to press the Start or Reset button to reset the dishwasher. Press for about 10 seconds. Then wait about 2 to 3 minutes and see if that did not reset the dishwasher.

Similarly, how do you reset a dishwasher? Try pressing the "Start/Reset" pad to reset the dishwasher and wait 2 minutes. If the problem persists, reset (reboot) the dishwasher by turning off power to the unit at the house circuit breaker/fuse box for 30 seconds. Restore power and the dishwasher should function normally.

Correspondingly, what does code LC mean on Samsung dishwasher?

water leakage sensor

Why is my Samsung dishwasher flashing?

All four (or more) lights are blinking This means the control panel is unable to communicate with the rest of the dishwasher. Turn off the dishwasher at the circuit breaker, wait two minutes, and then turn it back on. If the error continues, visit the Support Center to request service.

28 Related Question Answers Found

Do dishwashers have a reset button?

Yes, you can reset your dishwasher by pressing the Start/Reset button on the appliance and waiting a few minutes. If your dishwasher still doesn't start, you may need to reboot the entire system by turning off power to the appliance at the house circuit breaker or fuse box.

Why does my Samsung dishwasher keep stopping?

If the dishwasher stops during a cycle, first open and close the door to make sure it's latched. If these basic tips don't help, then a broken door latch, faulty control panel or failed electronic control board could be the problem. In some models, a failed heating element causes the dishwasher to stop.

How do I unlock my Samsung dishwasher?

Child Lock
  1. This option allows you to lock the buttons on the control panel - except the Power button - so children cannot accidentally start the dishwasher by pressing the buttons on the panel.
  2. To lock or unlock the buttons on the control panel, press and hold the Dry+/Child Lock button for three seconds.

Is there a recall on Samsung dishwashers?

The dishwasher recall includes various models that have been manufactured by BSH Home Appliances over a span of seven years, from January 2008 to January 2017. They were available in stainless steel, black, white, or with a custom panel. Last year, Samsung had to recall washing machines due to an issue with exploding.

How do you drain a Samsung dishwasher?

Also make sure you're keeping the filter and drain area inside the dishwasher clean of food and debris.
  1. Inspect the dishwasher's drain connection at the sink.
  2. Check the drain hose.
  3. Run water in the sink that the dishwasher is connected to.
  4. Clean the drain, filter, and sump in the tub.
  5. Request service.

How do I fix 4e error on my Samsung dishwasher?

Error 4E: description
Check the water supply to make sure that everything is OK with the valve. Measure the pressure as its low value may cause the error code 4E. Power off the appliance and make sure that the supply valves are open. Just in case, it is necessary to turn them clockwise and then counter-clockwise out.

What does IE mean on Samsung dishwasher?

Common solutions for: Samsung IE or 1E - WATER INLET ERROR // Water not entering dishwasher correctly. Solution 1: Make sure water supply valve to dishwasher is turned on. The manufacturer has assigned this error or fault code to indicate that the dishwasher is not filling with water properly.

How do you drain a dishwasher?

Check the drain hose.
  1. You can access the drain hose by removing the kick plate on the front of the dishwasher.
  2. The drain hose runs from the drain pump on the bottom of the dishwasher to the sink drain or air gap on the sink.
  3. Use a flashlight to follow the hose to the drainage area.
  4. Correct any kinks in the line.

What does 7e mean on Samsung dishwasher?

7E Water wall vane motor error. Remove the packing tape on the water wall vane if not removed during installation.

What does LC mean on washing machine?

If the control lock has been activated, the control will not function. If you try to push buttons, you may see the code "LoC" or "LC" (depending on your model). This is a reminder that you have set the control lock, and need to de-activate it to allow the washer controls to function.

Why is my dishwasher not working?

A dishwasher that won't stop filling may have a faulty float switch, a timer stuck on fill, or a water inlet valve that is stuck open. If your door isn't properly closed, the dishwasher will not start. If your latch is fine, check the timer or electronic control, especially if your drain pump motor isn't starting up.

How do I reset the control panel on my Whirlpool dishwasher?

How to Reset a Whirlpool Dishwasher Control Board
  1. Press the "Off" button on the Whirlpool dishwasher. Nothing will appear to have happened since the lights on the control board will not be illuminated.
  2. Unplug the dishwasher's power cord from the AC outlet.
  3. Let 10 to 15 minutes pass.
  4. Select "High" or "Pots & Pans" from the control panel board.
  5. Let a minute pass.

Why is no water going into dishwasher?

Your dishwasher may not be filling with water simply because the water valve's filter screens are dirty and debris-filled. Gain access to your water inlet valve and try cleaning it out. Alternatively, your water inlet valve could be defective altogether. That could be the reason your dishwasher is not filling.

What is the life expectancy of a dishwasher?

The typical dishwasher can be expected to last between seven and 12 years, with the average working expectancy being nine to 10 years. Certain factors, such as cost, quality, brand, care, maintenance and frequency of usage, can affect the life expectancy of a dishwasher.

How do I reset my Samsung dw80k7050us dishwasher?

Quick answer: The LC flashing on your Samsung dishwasher indicates that the leak sensor in the dishwasher detects a water leak or moisture. To clear the error code LC, simply remove power to the dishwasher for 15 minutes. This should reset the dishwasher and clear the error code.

How do I reset my GE dishwasher control panel?

To reset a GE dishwasher, press the Start or Reset button during a cycle. If you have a top-loading dishwasher, you'll need to open the top, press the button, and close it again. Then, wait 2 minutes for the dishwasher to pump out the water.