How do I reset my Kia immobilizer?

Category: automotive auto parts
4.5/5 (6,195 Views . 29 Votes)
Enter your Kia and place the key in the ignition, turning it as far as it will go without starting the engine. Push the lock button on your key fob for three seconds, until the lights on your dashboard blink. Your key has been reprogrammed, and your alarm and computer have been reset.



Subsequently, one may also ask, how do you reset an immobilizer?

Hold down the panic button for five seconds to reset the immobilizer. Next, push the lock button two times and wait ten feet away from the car for ten minutes.

Subsequently, question is, how do I get my car out of anti theft mode? The first way and most common way to get the anti-theft system to turn off is by using your key fob. You can press the alarm button, and this should get the system to turn off if you are close enough to the vehicle.

Just so, how do I reset my VW immobilizer?

How to Restart a Volkswagon Immobilizer

  1. Remove the incorrect Volkswagen key from the car engine.
  2. Click the “Unlock” button on your VW smart key fob.
  3. Insert your original, synced smart key into the car ignition and start the engine.
  4. Turn off the engine and remove the key from the ignition.

How do you fix an immobilizer problem?

Many immobilizer problems can be fixed simply by simply replacing the battery in the key fob. Many transponder keys depend on a small battery to relay the security code to the car immobilizer. Be careful replacing the battery so you don't accidentally damage the transponder chip inside.

38 Related Question Answers Found

Can you disable a car Immobiliser?

People can use a certain method to disable immobilizer system and however most famous method is by reprogramming EEPROM chip on ECU. Suppose you lose your car key then you must remove car immobilizer from your car. You can strip little insulation off every wire which ensures that it could not touch each other.

How do I bypass Immobiliser on Autowatch?

Autowatch immobilizer bypass and tag programming
  1. While the light is flashing (because the immobiliser is armed) turn the ignition ON.
  2. Turn the ignition OFF, and the light will start flashing.
  3. Turn the ignition OFF, and count the flashes.
  4. Turn the ignition OFF, and count the flashes.
  5. Turn the ignition OFF and count the flashes.

Why is my engine immobilizer light on?

The immobilizer warning light turns on if your anti-theft system does not recognize the car key being used, if it's the wrong key or low on battery.

What is an immobilizer bypass?

An immobilizer bypass module allows the user to remotely start the car. As it is essential for the cars to start. Whether they're called an ignition immobilizer interface, transponder bypass kit, or a pass lock interface, they are all bypass modules and they do the same job.

What does a immobilizer do?


An immobiliser or immobilizer is an electronic security device fitted to a motor vehicle that prevents the engine from running unless the correct transponder key (or other token) is present. This prevents the vehicle from being "hot wired" after entry has been achieved and thus reduces motor vehicle theft.

When your car won't start but all the lights come on?

Broken or Damaged Ignition
If your headlights can turn on, but your car won't crank, that means that your battery is charged, but either the starter or ignition is the problem. If the starter or ignition is the problem, a starter engine can be jumped by using a charged battery.

Do I have to reprogram my fob after battery replacement?

The key fob will need to be reprogrammed to the vehicle as when the battery was replaced in the key fob, the key was reset. This is why nothing is working with the key fob. After replacing the battery in the key fob remote, you will need to reprogram the remote to the vehicle.

How do I know if my Immobiliser is on?

Below are some symptoms that you can expect to experience whenever there is a malfunction with your immobilizer system:
  1. Locking Problems: When you use your key to lock the doors of your vehicle remotely, the doors do not lock.
  2. Locking Problems:
  3. Unlocking Problems:
  4. Engine Does Not Start:
  5. Alarm Problems:

How do I reset my key fob after replacing the battery?

Key Fob Reprogramming in General
  1. Replace the batteries inside the key fobs.
  2. Get Inside the Car.
  3. Turn on the Ignition.
  4. Press the Lock Button on Remote.
  5. Listen for a Lock Sound.
  6. Programming Additional Remotes.
  7. Turn Off the Ignition.
  8. Step out from your car and test the result.

What is immobilizer delete?


Immobilizer delete lets you add a remote start feature from an aftermarket security system. Otherwise the immobilizer will prevent the car from running without the special key in the ignition, which kind of defeats the purpose of a remote starter.

How do I reset my car key?

Press and hold the "Lock" button on the key in the ignition and on any additional fob remote car starters you may have. Turn the key to the "Off" position. Do this within ten seconds of turning the key to the "On" position for the fourth time. Remove the key from the ignition.

Why is my key fob blinking red?

For those who have just changed the battery and are finding the Volkswagen key fob has a flashing red light that just won't quit, keep in mind the code has to be rest. Press button A or C (lock and unlock buttons) for one second, then unlock and relock the vehicle with your master key.

Can you reprogram a VW key fob?

Press the "Unlock" button on the key fob. Wait one second, and then press the "Unlock" button again. Turn the ignition off and remove the key. The key fob will now be programmed to the vehicle.

How do I program my immobilizer chip?

Programming or reprogramming of your chip keys can be done in just minutes from your vehicle using just the key itself.
  1. Insert your chip key into the ignition of your vehicle and turn the key to the "On" position.
  2. Leave the key in the "On" position for 10 minutes and 30 seconds, then turn it back to the "Off" position.

Does my car have an Immobiliser?


Car immobilisers have been compulsory on all cars made since 1998. Finding out if your car has one fitted can be done quickly and easily by checking your vehicle handbook. If your car was made before 1998, it is likely that you will not have an immobiliser fitted. You can however purchase one and get it fitted.

Can anti theft stop car from starting?

Anti-theft systems are designed to prevent your vehicle from being stolen. These systems are constantly evolving. Essentially, they work via an electrical circuit disconnecting to prevent power from flowing so your car won't start or will die immediately.

Can I program a car key myself?

Get a blank key.
You can't, for example, take a remote for your old car and program it to your new car even if they are the same make and model. With newer cars, most likely you will not be able to program a new key yourself. You will have to visit a dealer or locksmith.