How do I connect my AIO to my motherboard?

CPU Cooler: Fractal Design Celsius S24 AIO L

Moreover, can I plug case fan into AIO pump?

See More: Will a case fan work plugged into the AIO_PUMP connector? The AIO-pump is designed for a water-cooling system , most likely together with the EXT-FAN (sensors). The CHASIS-FAN's should be sufficient. You can also use fans running at 12V running at a continuous (high) speed.

Beside above, what is a AIO pump header? First off, an AIO is short for “All In One”, which in this context refers to a liquid CPU cooler. The AIO combines the water block, radiator, tubes, fans, fittings, and pump into 1 sleek package.

In this regard, should I run my AIO pump at 100?

Pumps should run at full tilt, for maximum liquid flow. That is why most AIO coolers (minus digitally controlled models such as corsairs I series) have their pumps attach to a 3 pin fan header, to run at 100%.

Do AIO coolers need maintenance?

You are probably wondering if AIO coolers need maintaining, the answer is yes. Not like how Custom water loops need maintaining, they require you to maintain everything. With customer water loops, you only need to maintain the fans and the radiator, make sure they're dust-free.

32 Related Question Answers Found

How long does an AIO cooler last?

Cryorig warranty is 6 years for all coolers including new AIO kits. That's 3 years basic warranty + 3 years when you register your product.

Do AIO coolers need thermal paste?

Yes, you do need thermal paste, no matter what cooler you use. However, the H100i has paste pre-applied, so all you have to do it attach the cooler to the CPU, plug in the cables, and it will work.

Do AIO coolers come filled?

All-in-one coolers

These types of water coolers all come pre-filled with a set length of tubing connecting the waterblock and pump to the radiator. Because it's a sealed unit, they require little to no maintenance. They also don't need to be topped up as they don't experience evaporation like DIY setups.

Do you need to fill an AIO with water?

That doesn't mean it isn't necessary though, since water can evaporate through the tubing and eventually lead to a loop with too little liquid. That's why some AIO coolers are built to be user refillable. Normally you use distilled water to fill your cooling loop, or special coolants that you mix with distilled water.

Does it matter which fan header I use?

Other than that, the header used makes no difference. The Shark Fin is a high volume fan - that's why it's moving more air. If you boot to bios, you can check your fan speeds there.

How can I check the temp of my CPU?

To find your CPU temperature, scroll down to the entry for your CPU–mine, for example, is an “Intel Core i7 4930K”–and look at the “Core #” temperatures in the list. (Note that “Core Temperature” is different than “CPU Temp”, which will appear under the motherboard section for some PCs.

Is liquid cooling worth it?

Liquid cooling is the best way to cool a CPU because water transfers heat much more efficiently than air. Liquid cooling also makes your PC run quieter because you won't have fans constantly running at a high RPM. However, liquid cooling a PC can also be dangerous if water leaks onto hardware.

How do you control an AIO pump?

Connect the pump power to to a SATA power connector, connect the pump control to the AIO header and let it run at 100% (the pump on 100% is very quit). Connect the 2 radiator fans to CPU and CPU_opt fan headers on motherboard. By default, thee aio header is configured to run at full speed.

Can I use AIO pump header for fan?

That tells which way to plug in the fan connector. Also, if you have an all in one (AIO) liquid cooler, also only plug that into the CPU fan header. Some boards will have a fan header dedicated for a water pump (labeled W_PUMP), this is intended for a dedicated water pump and not an AIO unit.

What does Cpu_opt stand for?

CPU_OPT is a optional fan header for the CPU area. You can use it for a second fan on your CPU cooler if you have one or you can use it for a flowmeter/pump RPM sensing or even just for another case fan (like I have done). SYS_FAN is a fan header usually reserved for case fans.

Can I plug a case fan into m 2 fan?

Chassis fan into m. 2 header is a 4 pin, so it should work fine to put a 3pin fan in there, but would it run fixed rpm's according to m.

Can I plug case fan into CPU opt?

Technically you could. Usually that header is going to be variable speed dependent on the CPU temp sensor unless you manually set the speed in the BIOS. If you do use the CPU-OPT header I'd plug the rear ran into it since it's closest to the CPU and could work in tandem with the CPU fan this way.

What is a PWM fan?

PWM stands for pulse width modulation. PWM fans and/or pumps are found in some CPU coolers and GPU (aka graphics card) coolers. They use an integrated circuit to control the speed of a fan or pump and, therefore, how much cooling it's providing to the CPU or GPU.

Is a fan a pump?

A fan is a compressor and a compressor is a device which moves fluids in a gaseous state. A pump is device which is used to move a liquid.

What is System fan pump?

Generally speaking, it's related to how the motherboard will handle each fan header. CPU fan can normally be set to scale with CPU use. SYS fans are either constant, or can be set to scale with overall system temperature (or sometimes CPU temp). Pump fans are normally 100% all the time to properly power the WC pump.

How do I know my AIO pump is working?

Even if the pump is dead you can probably be ok by entering the BIOS for like 30 seconds or so to check, worst case scenario your system will shut off due to temps but it should be ok relatively speaking. And just your fingers on the tubing or pump should be enough for you to feel if water is flowing through.

Does AIO pump speed matter?

AIO fan speed should have absolutely nothing to do with CPU temp. It's not cooling the cpu it's cooling the water in the loop. You'll just get fans that are changing speed all over the place for absolutely no reason. The difference 50% and 100% pump speed is probably 2-3c on the cpu.