How do I bypass a zone on First Alert Professional?

Asked By: Xinyuan Lohrstrater | Last Updated: 28th April, 2020
Category: home and garden home security
4.8/5 (710 Views . 43 Votes)
Bypass a Zone
  1. Enter the following: Your 4-digit code. The number 6 (bypass button) Two-digit zone number of the zone you want to bypass. (01, 02, 03, etc.)
  2. Repeat this process for all zones you would like to bypass.
  3. Once your system is disarmed, this process will need to be repeated in order to arm your system again.

Click to see full answer

Keeping this in view, how do you bypass a zone on ADT alarm?

Steps for Setting a Bypass Zone on ADT Systems

  1. Enter the function menu by pressing “*”
  2. Keyboard will display “Press * for Zone Bypass”
  3. Press “1” or “*” to enter bypass mode.
  4. Select 'Zone Bypass' and enter your access code (if required)
  5. Enter the zone number (between 01-64) that you wish to bypass.

One may also ask, how do you bypass an alarm zone? To bypass a zone on your alarm system:

  1. Enter the following: Your 4-digit code. The number 6 (bypass button) Two-digit zone number of the zone you want to bypass. (01, 02, 03, etc.)
  2. Repeat this process for all zones you would like to bypass.
  3. Once your system is disarmed, this process will need to be repeated in order to arm your system again.

Likewise, how do I reset my First Alert Professional alarm?

How to Reset a First Alert Alarm Code

  1. Enter your four-digit master code via the control panel's number buttons.
  2. Enter the single-digit user number assigned to the code you want to change.
  3. Wait a few seconds; the control panel beeps when the code is deleted.
  4. Re-enter the master code, as in step 1, and press "Code."

How do I bypass alarm zone IDS?

Hold down the [9] key until the keypad buzzer sounds to enter bypass mode. 3. Press the number corresponding to the currently bypassed zone, then press the [E] key.

34 Related Question Answers Found

What does Zone bypass mean?

Bypass is the term used to describe the ability to deactivate specific zones of the alarm system before arming the system. Bypassing allows for certain areas to be disarmed while the rest of the space is armed.

How do you delete a zone on a Honeywell alarm system?

Remove a Honeywell wireless zone by entering zone programming, setting the zone/response type to 00 or "New". Then confirm that you want to delete the zone when prompted by the alarm panel. Once the zone has been deleted from programming, it can physically be removed from the system.

How do you bypass a motion sensor alarm?

Move slowly along the walls in which the sensors are located, and as low as possible, while proceeding forward. Many motion sensors have blind spots that make it difficult to detect movement directly underneath them. Be aware that another sensor may be pointing in your direction from the other side of the room.

How do I delete a zone in Vista 20p?

To delete a zone, change the zone type to 00, then press *. When prompted to “Delete Zone?” press 1 for yes. When finished removing or re-programming zones, press 00 at the “Enter Zone Number” prompt.

How do I disable a zone on my DSC alarm?

Tech Tips: How to Bypass a Zone on a DSC Power Series Security Alarm Panel
  1. The System Must be disarmed prior to proceeding.
  2. Press the * Key.
  3. Press the 1 Key.
  4. Use the > key to scroll to the zone you wish to bypass.
  5. Press the * Key on the appropriate zone.
  6. A “B” should appear next to the zone when the system is bypassed.

What is an alarm zone?

Basically alarm zones are how a security system manages and controls sensors. The sensors are assigned to zones and when a sensor is trigger the system informs you which zone a sensor has been triggered. The control panel may also “speak” to you to let you know the zone where the security event took place.

Can home security systems be hacked?

Yes, security systems can be hacked into just like computers. A burglar can hack into your security system, deactivate the alarm, enter your house and get away with the goods without leaving a trace.

How do I reset my alarm system?

How to Reset a Home Alarm System
  1. Check the manufacturer's website for installer instructions.
  2. Check out do-it-yourself alarm support sites (see References below).
  3. Locate the power source to the Main Control Panel.
  4. Disconnect the backup battery in the Main Control Panel.
  5. Leave power off for a minimum of five minutes.
  6. Reconnect the battery leads.

How do you clear an ADT fault?

The security system may need to be reset by entering your code into your system and hitting off twice. Remember to remove the system from Test Mode. Go to MyADT.com and click on My Alarm from the System Management option, select Stop Test to remove the system from test mode and restore operations.

How do you disable a window alarm sensor?

Yes, you can disable a window alarm sensor. A window sensor can be temporarily disabled by bypassing the associated zone. You can also permanently disable the sensor by deleting its zone from programming. You will need to re-enroll the sensor with the system if you want to use it again.

How do you sneak out of a house with an alarm?

Steps
  1. Identify your ideal escape route. You'll find the magnet sensors of most alarms on the windows and doors of your home.
  2. Inspect the alarm mechanism to verify it's magnetic. Generally, magnet sensors will look like a small metal box.
  3. Use a magnet to bypass the sensor.
  4. Return the door or window to normal.

How do you clear the memory on a DSC alarm system?

To clear the memory, arm and disarm the system. Certain sensors (such as smoke detectors and glass break detectors) have to be reset after an alarm. To reset detectors, press and hold the RESET key () for 2 seconds. If a sensor fails to reset, it may still be detecting an alarm condition.

How do you bypass a car alarm?

Part 1 of 1: Turning off a car alarm
  1. Materials Needed.
  2. Step 1: Familiarize yourself with the alarm.
  3. Step 2: Start the car.
  4. Step 3: Use your key to unlock the driver's door.
  5. Step 4: Pull the fuse.
  6. Step 5: Disconnect the battery.
  7. Step 6: Maintain your key fob.

What is sensor bypass?

Bypassing a sensor allows the system to remain armed while leaving a specific sensor (or sensors) in a disarmed status. For example, if an individual wants to arm their doors and windows but leave a kitchen window open, that sensor can be bypassed.

How do you remove an alarm sensor from a door frame?

Complete the following steps to remove an alarm sensor from your door:
  1. Clear the zone. Go to your panel, and delete the zone from the panel.
  2. Remove the wires. If you have a hardwired door alarm sensor, then you must disconnect and remove the wires.
  3. Take off the sensor.
  4. Take off the magnet.

What does bypassed sensors cleared mean?

Clearing a bypassed sensor means that it can keep the system from arming until its problem is resolved (i.e., the sensor's door or window is closed). To clear (UN-bypass) a bypassed sensor, click CLEAR BYPASS.

How do you bypass the sensor on a Simon XT?

Simon XT - Bypass Sensors
  1. Press Doors+Windows then Motions to Arm.
  2. Press Bypass then enter Master Code then press or to scroll sensors.
  3. Press OK or BYPASS to bypass and Arm.