How do I aim my pool return?

To give your swimming pool the best filtration you should point your return jet away from your skimmer and downward to get the best circulation and filtration. The top few inches of your pool is usually the dirtiest and for your pump to clean properly it is best to keep the water calm on the top of the water.

Similarly, you may ask, how should I aim my return jets in my pool?

It's good practice to point your return jet in a direction that will spin the water in your pool, hence, circulate. If your pool only has one jet, it's a good idea to point the jet to the opposite side of your skimmer and downwards.

Also Know, where is the return on a pool? Step 1. Pool return fittings are located on the sides of in-ground pools and come in different eyelet sizes. The most common have an “eyeball” fitting that can be adjusted to point water in the direction you want.

Similarly one may ask, what direction should the Jets in a swimming pool be pointed?

Most people like to point the jets in a unified direction, clockwise or counterclockwise.
Conventional wisdom dictates that most pool owners should point the jets up to create vigorous ripples in the water.
Your skimmer(s) are designed to skim surface area.

Should pool return jets point up or down?

To give your swimming pool the best filtration you should point your return jet away from your skimmer and downward to get the best circulation and filtration. The top few inches of your pool is usually the dirtiest and for your pump to clean properly it is best to keep the water calm on the top of the water.

37 Related Question Answers Found

Why am I getting bubbles coming out of my pool jets?

If you are seeing a significant number of bubbles coming out of your return lines into the pool, you probably have an air leak in your filtration system. Possible sources of this problem are low pool water levels, leaks around the strainer lid, leaks in the unions or leaks in the pump seals.

Is it OK to run pool pump 24 hours a day?

Chemicals that you add to your pool while the water is circulating don't need to be recirculated; they will stay mixed even if you don't pump the water continually. Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time.

How many returns should my pool have?

My rule of thumb is there should be at least two returns for every skimmer. Plus, for a 22k pool, two skimmers is not unreasonable although not totally necessary.

Is it better to run pool pump at night?

Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up. Your pool is more vulnerable during the day, plants don't grow at night the way they do during the day–that's true of ALL plants including Algae.

What is the drain at the bottom of swimming pool for?

Pool Drain Systems. We've already seen that the water in a swimming pool needs to circulate through a filtering system, to remove dirt and debris. During normal operation, water flows to the filtering system through two or more main drains at the bottom of the pool and multiple skimmer drains around the top of the pool

Why are my pool jets weak?

The most common reason for weak jets is an air leak. An air leak would come from the suction side of the system. This would be the area between the skimmer and the pump. The pump strainer, in most cases, should be full of water and have no visible air.

How long should you circulate your pool?

8 hours

How do I circulate my pool without a pump?

Close the tap and quickly remove the garden hose while pointing it down to the ground. This will allow water to flow from the pool to the ground, completing the siphoning process. Rest as you wait for the siphoning hose to empty the pool. The siphoning hose drains the pool water as an alternative to a pump.

What causes poor pool circulation?

Water leak in the pressure side of the pump - A pressure leak will cause lose of water and water pressure in the circulation lines between the pump and the pool return ports. Generally these leaks can be corrected by replacing a bad gasket in the pool equipment after the pump.

How do you keep a pool clean without a filter?

To keep the pool clean without a filter, it is necessary to use chlorine with a flocculant or to use a flocculant chemical. This product groups the impurities that float in the water, causing them to fall to the bottom of the pool so that they can be removed later with a cleaner.

How do I increase circulation in my pool?

One of the best ways to immediately improve your swimming pools circulation is to clean your filter and remove any debris from the skimmer basket. By doing this your pump will be allowed to push more water through your hoses and out the pools return boosting the water circulation.

How many skimmers does a pool need?

How many skimmers do I need? The Association of Pool and Spa Professionals (APSP) advises that there should be a minimum of one skimmer per 400 sq. ft. of pool surface area.

What is a return line in a pool?

Water is sucked in through the skimmer(s) and the main drain(s), pumped through your filter, and then back into your pool through the return lines. Every pool has a skimmer to suck in the water into and through the filter, and every pool has a return line to push the water back into the pool.

What PSI should my pool pump be at?

10 - 25 pounds per square inch

What are pool return jets?

1-1/2" Swimming Pool Spa Return Jet Fitting 1" Eye Ball Hayward SP1419E The Swimming Pool Spa Return Jet is the fitting that allows the clean filtered water back into the swimming pool after it has gone through the entire swimming pool filtration process.

Should you run pool pump in rain?

When rain is heavy, pool equipment is at risk for flooding. If flooding water threatens to submerge the pool pump, shut off power to the pool on the main panel and see if you can remove the pool pump safely and store it indoors. If a pool pump is submerged and gets waterlogged, it will need to be replaced.

Which direction should pool water circulate?

But where should I point them?

Most people like to point the jets in a unified direction, clockwise or counterclockwise.
Conventional wisdom dictates that most pool owners should point the jets up to create vigorous ripples in the water.
Your skimmer(s) are designed to skim surface area.