How do FloodSafe hoses work?

Asked By: Junyong Goldaracena | Last Updated: 28th April, 2020
Category: home and garden home appliances
5/5 (469 Views . 42 Votes)
These are special flexible water supply connectors, aka 'hoses', with a mechanism that will completely shut off the flow of water if the hose bursts. These connectors are made for faucets, toilets, ice makers, dishwashers, and washing machines, and can be identified by an extra length of metal at the hose inlet.

Click to see full answer


Keeping this in consideration, how do I reset my FloodSafe hose?

To reset, remove from water flow end, reconnect (should reset the feature) and SLOWLY turn water on. I tried those FloodSafe hoses a few years ago on a couple of toilets. At least twice each week just flushing the toilet would trigger the auto-shutoff. Resetting was a huge pain.

Likewise, what are the best washing machine hoses? Best Washing Machine Hoses comparison table

  • 1st Place. Premium Stainless Steel Washing Machine Hoses with 90 Degree Elbow, 4 Ft Burst.
  • 2nd Place. GE WH41X10207 Rubber Inlet Hose 2-Pack for Washer.
  • 3rd Place. 2-Pack Rubber Washing Machine Hoses 6ft Long - Hot and Cold Water Supply.
  • 4th Place.
  • 5th Place.

Likewise, how long do stainless steel braided hoses last?

five years

What is a Floodsafe hose?

These are special flexible water supply connectors, aka 'hoses', with a mechanism that will completely shut off the flow of water if the hose bursts. These connectors are made for faucets, toilets, ice makers, dishwashers, and washing machines, and can be identified by an extra length of metal at the hose inlet.

22 Related Question Answers Found

How long do braided washer hoses last?

Regardless of which set of washing machine hoses you choose, you should replace them about every three to five years. It's also a good idea to check the hoses for damage or leaks about once a year as part of your regular plumbing maintenance.

How tight should washer hoses be?

Make a note of which is which. When connecting the hoses to the supply valves and to the washer DO NOT over tighten. You are only trying to compress the little rubber washer in the end of the hose to make a good seal. Snug is good (if one of the hoses leak you can tighten them a bit to stop the leak).

Are flexi hoses any good?

Flexible hoses are very versatile and significantly reduce the time it takes to hook-up hot and cold water pipe appliances, such as taps, dishwashers and water heaters.

Should you use Teflon tape on washer hoses?

Tape or pipe dope is only required when using tapered pipe threads to fill in between the threadsthe threads don't do anything on a washing machine hose WRT sealing anything. Some of those hoses come with a fairly hard gasket, so it may take a fair amount of tightening to seal, but tape will mess things up.

Are washing machine hoses a standard size?


Two standard hoses are connected from the back of the washing machine to the water supply valves. The hot and cold hoses are ¾ inches in diameter. The hoses typically are marked to distinguish them from each other. Some hoses are constructed to be used for both hot and cold water.

Can you use a garden hose for washing machine?

It's simple, and if you don't already have the parts you need, they're inexpensive and easy to obtain. The couplings used on washing machine hoses are essentially the same couplings used on an average garden hose, insofar as the threads used to screw the hose onto the washing machine are the same on both.

How often should you replace water supply lines?

A good rule of thumb for replacing supply pipes is: Brass pipes: 80-100 years. Copper pipes: 70-80 years.

Average Plumbing Lifespans
  1. You're experiencing frequent clogs.
  2. Food is taking a long time to break down.
  3. You're resetting it more often.
  4. There are lingering odors that just won't go away.

How long can washer hoses be?

You can buy supply hoses in lengths up to 96 inches, which you can attach to your existing hoses with 3/4-inch hose thread connectors.

How often should you change washer hoses?


It is recommended that you replace your washing machine hoses every 5 years, or anytime you notice any of the signs above. Rubber washing machine hoses should be replaced with stainless steel braided hoses.

How much do washing machine hoses cost?

Washing machine hoses generally cost about $50.

How many hoses does a washing machine have?

Unplug the washer and pull it away from the wall far enough that you can work or reach behind it. You will see three hoses: two water hoses for hot and cold water and the larger drain hose. If you disconnect the drain hose for more access, remember to have a bucket ready because it will have water in it.

When should you replace a washing machine?

The average life expectancy of a new washing machine is 11 years. Consumer Reports recommends replacing any appliance that's more than eight years old, unless it's a high-end model and has a particular appeal to you. Others suggest replacing any top-loading washer manufactured in 1999 or earlier.

How do you fix a washing machine drain hose?


Remove the hose clamp securing the drain hose to the pump by unscrewing it with a flat-head screwdriver. If the hose has a spring clamp, squeeze the legs of the clamp with a pair of adjustable pliers and move the clamp a few inches down the hose. Place a towel under the pump and pull the hose off the pump's outlet.

Are washer hoses Universal?

Stainless-Steel Universal Washer Hoses (2-Pack) is made from heavy-duty stainless steel. The stainless steel hoses have a protective noncorrosive coating for added strength and durability. The 4 ft. length suits most laundry setups, and the hoses fit most standard washers.

Why are my washer hoses leaking?

A common reason for a washer water hose leak is a worn washer that sits in the water fill hose. Over time these washers get “smooshed” and allow water to pass through which causes a leak. These seals or washers can be easily replaced. Rubber Seal In Washing Machine Hose Prevents Leaks!