Does Home Depot sell thermocouple?

Asked By: Charki Linzoain | Last Updated: 4th May, 2020
Category: home and garden home appliances
4.9/5 (24 Views . 12 Votes)
Thermocouple/Thermopile - The Home Depot.

Click to see full answer

Also question is, are thermocouples universal?

Universal Thermocouples. Universal thermocouples, as the name implies work on most water heaters. They are available online and in home supply stores for a reasonable cost. The length and the thread type are the two concerns when purchasing one.

Additionally, how much does a thermocouple cost? Thermocouple Replacement - $20-$150 Calling a professional plumber to install a new thermocouple should only be up to $150. If you do the work yourself, you will only pay the price of the part which is about $20.

Consequently, how do I know if my thermocouple is bad?

If you can't get the flame to light at all, and you're sure the gas is on, there's probably an obstruction in the pilot tube. If the flame lights and goes out when you release the gas control knob after holding it in for the recommended 20 to 30 seconds, that's the sign of a thermocouple malfunction.

Can you repair a thermocouple?

A burned out or broken thermocouple should be replaced. To replace a thermocouple: Step 1: Unscrew the copper lead and the connection nut inside the threaded connection to the gas line. Step 2: Under the mounting bracket at the thermocouple tube, unscrew the bracket nut that holds the tube in place.

37 Related Question Answers Found

Can you replace a thermocouple yourself?

If you are set on replacing the thermocouple yourself, here are a few things to keep in mind. Locate the thermocouple next to the pilot light and disconnect the unit by removing the copper lead. Unscrew the gas line connection nut AND bracket nut holding the thermocouple in place.

How long does a thermocouple last?

Thermocouples can last several years, but they don't typically last as long as the furnace itself. If the pilot remains lit, but the main furnace doesn't stay lit, it's time to replace the thermocouple. Replacement thermocouples are in stock at most hardware and home improvement stores.

Are there different size thermocouples?

Thermocouple vs.
First, consider the difference in temperature ranges. Noble Metal Thermocouples can reach 3,100 F, while standard RTDs have a limit of 600 F and extended range RTDs have a limit of 1,100 F.

How do you test a thermocouple?

Steps
  1. Locate the pilot light controls on the gas valve.
  2. Turn the pilot light on for 30 seconds.
  3. Release the button to see if the pilot light goes out.
  4. Turn off the gas supply to test the thermocouple again.
  5. Count to 20 and wait for the pilot light to go out.
  6. Listen for clicking near the gas valve.

Can a thermocouple leak gas?

Without a thermocouple, it will seep tiny bits of gas into the combustion chamber of the device. In a few hours, it can leak enough gas for a small explosion, probably just enough to shorten your eyebrows.

How hard is it to change a thermocouple?

It's easy to replace and a new one costs $5 to $10. Rather than trying to unfasten the thermocouple inside the water heater's burning chamber, it's easier to remove the whole burner and thermocouple assembly.

Can you clean a thermocouple?

If the Thermocouple is faulty it will cause the unit to shut down. How to clean? Remove Thermocouple from pilot assembly, using steel wool or emery cloth to lightly clean the tip removing any soot or build up that might have accorded due to an improper pilot flame.

Can you jump out a thermocouple?

Harley said: Bypassing the thermocouple would make it no more dangerous than any propane grill. It's not going to make it explode. The only thing it would prevent is losing a tank of propane into the atmosphere if the flame happened to go out because the valve wouldnt close.

What causes a thermocouple to fail?

Changes in temperature can cause regular expansion and contraction in metal, which will cause thermocouples to weaken over time. After enough time, metal fatigue can cause a thermocouple to break.

How many millivolts does a thermocouple put out?

The normal millivolt output is 25 to 35 millivolts; on some, you may even get up to 35. The other part of this safety pilot system is the electromagnet (power unit). It is if you will the LOAD and we can say the thermocouple is the SOURCE.

What does thermocouple look like?

The thermocouple looks like a piece of metal tubing smaller than a soda straw. To find it, first locate the gas control box. This is the box that the main gas line enters, where you turn the gas on in the furnace. The other end of the thermocouple sits in the flame of the pilot light.

Why does my pilot keep going out?

Usually, a problem with the thermocouple causes the pilot light to go out. The thermocouple is the small copper rod that the pilot light hits. The thermocouple's job is to shut a gas safety valve if the pilot light goes out. That's important because gas is always being supplied to the pilot to keep the flame lit.

How do you adjust a thermocouple?

To adjust the thermocouple, you must tighten the thermocouple nut with a wrench. Take care not to apply too much pressure to the nut -- just tighten it slightly. Then try lighting the pilot. If the pilot won't stay lit, replace the thermocouple with a new one of the same type.

Why does my pilot light go out when I release the pilot light knob?

The most likely of those is that the thermocouple needs to be replaced. The button you press to light the pilot bypasses the thermocouple. When you release the button, the thermocouple ensures that unburned gas doesn't get released by shutting off the gas when it's not heated by the burning pilot light.

How does a thermocouple work?

A thermocouple is a sensor used to measure temperature. Thermocouples are made with two wires of different metals, joined together at one end to form a junction. As the temperature changes, the two dissimilar metals begin to deform, causing a change in resistance.

Where is a thermocouple used?

Thermocouples are widely used in science and industry. Applications include temperature measurement for kilns, gas turbine exhaust, diesel engines, and other industrial processes.

How often should you flush hot water tank?

Most homeowners should flush their water heaters every six months or so, but if you have extremely hard water, you may want to do it more often. Flushing your hot water heater could be necessary as often as every few months depending on the mineral content of your local water supply.