Do you install toilet flange before tile?

5 Answers. The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too.

Similarly one may ask, do you install toilet before tile?

Bathroom floor tiles, whether ceramic or vinyl, must be properly installed before you install a toilet. Even if the toilet is already in place before you install the tiles, remove it, lay the tiles and re-install the toilet. Proper installation allows a smooth transition between the toilet and tiles.

Also, how do you secure a toilet flange to tile? How to Anchor a Toilet Flange in a Tile Floor

Set your toilet flange into position on top of the tile with the back holes lined up parallel to the wall behind and the two slots parallel to the two walls on each side of the toilet.
Locate and mark the areas where you will drill.

Also question is, how high should toilet flange be above tile floor?

With the toilet removed, you can see the toilet flange and measure its height above the floor. Optimum flange height to aim for is 1/4 inch above the finished floor. This typically allows for almost any type of wax ring to be used and still ensure a good seal.

Do you put flooring down before toilet?

Start With The Flooring If you're installing a new floor, pedestal sink, and toilet, you should install the laminate flooring first so it's under the sink and toilet. By installing the flooring first, you will also be able to more easily switch up cabinetry or fixtures, without having gaps in the flooring.

39 Related Question Answers Found

In what order do you renovate a bathroom?

Steps to Remodel a Bathroom

Remove or Demolish Bathroom Fixtures.
Install Your New Shower or Tub Basin.
Install New Fixtures and Features.
Lay Down Your New Floor Tiles.
Hang New Drywall and Start Painting.
Install Your New Vanity and Cabinets.
Finish Hooking Up the Plumbing.

How long after installation can a toilet be used?

Yes, you can use it immediately but I was advised by the plumber who installed mine not to wash the floor for 24 hours.

Do I have to remove the toilet to install vinyl tile?

Removing the Toilet

With peel and stick tile, there's no need to remove the toilet. They aren't as easy to cut into rounded shapes as vinyl tile is, so they often require that you remove the toilet.

What is the easiest bathroom floor to install?

Your three best DIY bathroom floor options are cork, engineered hardwood, and luxury vinyl. Why? Cork flooring (cork plank flooring, in particular) is very easy to install. Just snap planks together to create a floating floor.

How soon after laying tile can you grout?

24 hours

Do you tile under bath?

if you dont tile fully under the bath, which you may not be able to do if the bath is in situ before tiling, and the bath does not seal effectively to the floor, then any leak under or around the bath will go through the floor - causing obvious problem if it is above ground floor!!

Does the toilet flange need to be flush with the floor?

The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too. The spacing of the toilet exit "horn" and sealing surface is designed for this height.

Should toilet flange be screwed to floor?

5 Answers. The bottom of the flange needs to be sitting flush with (or not more than 1/8" above) the finished floor or else the toilet will rock. The flange should be fastened to the floor. Dry fit the toilet to make sure it doesn't rock.

Do you lay tile under the toilet?

To install tile properly around the toilet, you need to affix it to the floor under the fixture. Because toilets sit on top of tile, any rough cuts are hidden, making it easy to achieve the appearance of tile that has been custom-cut for your bathroom.

How do you reinstall a toilet after tiling?

Follow the directions provided below to set the toilet ring into the flange after tiling the floor.

Step 1 - Seal the Drain Hole Before You Start Work.
Step 2 - Adjust the Toilet Flange Height to the New Floor.
Step 3 - Remove the Old Toilet Flange Bolts.
Step 4 - Attach the Toilet Ring to the Toilet Bowl Base.

Can toilet flange be lower than floor?

If a flange is more than 1/4 inch below the floor, buy some 1/4 or 1/2—inch thick PVC flange extenders and fit them around the flange to bring it up even with or slightly above the floor level. If it's 1/4 inch or less below the floor, then use an extra-thick, No-Seep No.

Should you caulk around a toilet?

Caulk helps to keep the toilet secured to the floor. The bolts are really supposed to keep the toilet secure, but caulk helps. Some people prefer to caulk all around the toilet and leave about a one-inch gap in the caulk at the back of the toilet to allow water to escape out in the event of a leak.

Can you stack toilet flange spacers?

Closet Flange Spacers build up existing closet flanges when installing new flooring to render finished floor height below grade. Rings can stack (maximum of 3) onto existing closet flange ring to accommodate desired height.

Can toilet be installed without flange?

2 Answers. The flange and accompanying bolts hold the toilet firmly to the floor and keeps the seal between the toilet and the floor. Without the flange or if it is broken, he would have to attach the toilet to the subfloor with wood screws, and if the floor is rotting out, those won't last long.

How do you extend the toilet flange after tiling?

A better solution is to raise the height of the flange.

Measure the distance from the top of the toilet flange to the top of the finished tile floor.
Purchase a toilet flange extension ring thick enough to raise the toilet mounting surface so that it's approximately 1/4-inch above the level of the finished tile floor.

Can a toilet flange be too high?

When your toilet flange is too high, your toilet may leak water and rock back and forth when used. Both the leaking and the rocking can warp or break the floor. A leaking flange can also rot the subfloor and lead to the accumulation of mildew and mold.

Does toilet flange go inside pipe?

Buy an inside closet flange. This toilet flange is designed to glue on the inside of the pipe or expand inside the pipe. The flange should be sitting with the bottom edge flush with the top of the floor. If it isn't, then you will have to cut away the old flange.