Can Bruce engineered hardwood floors be refinished?

Asked By: Shengyi Nilva | Last Updated: 19th May, 2020
Category: hobbies and interests woodworking
4.8/5 (1,306 Views . 22 Votes)
Bruce hardwood floors are reliable and durable floor products for your home. Like any hardwood floor, they will suffer wear and tear from regular exposure to dirt, heat and moisture. When the finish of Bruce hardwood floors becomes worn, you can restore it by refinishing the flooring yourself.

Click to see full answer


Accordingly, can engineered wood floors be refinished?

Yes, they can, at least once. Floors with a wear layer less than 2 millimeters thick can tolerate a light scuff-sanding with a buffer. Thicker top layers can be sanded just like solid wood, allowing you to erase deeper scratches and dents.

Similarly, how much does it cost to refinish engineered hardwood floors? Refinishing a 200 square foot room would cost $850-$1,260 to sand, stain, and finish with polyurethane. Replacing a hardwood floor of the same size would cost $2,000-$4,000 for solid or engineered wood.

Considering this, can you change the color of engineered wood floors?

The answer is usually YES! Many homeowners don't realize that you can change the color of hardwood flooring when you refinish your floors. Yes, it's true…you can go light or dark or red tones or anywhere in between. Most are pleasantly surprised it doesn't matter if you are going light to dark or vice versa.

How do you restore Bruce Hardwood Floors?

  1. Clean the floor with a vacuum that has a soft brush bottom.
  2. Fill in small gouges with a Bruce Touch-Up Kit filler stick.
  3. Wait for the filler material to dry.
  4. Sand the dried filler down flush with the floor's surface.
  5. Pour Bruce Fresh Finish into a 5-gallon bucket.
  6. Mop the entire floor.

36 Related Question Answers Found

Can engineered hardwood be sanded and refinished?

Can engineered floors be refinished? Yes, they can, at least once. Floors with a wear layer less than 2 millimeters thick can tolerate a light scuff-sanding with a buffer. Thicker top layers can be sanded just like solid wood, allowing you to erase deeper scratches and dents.

Can you refinish hand scraped engineered hardwood floors?

With modern finishes and stains, refinishing hand scraped hardwood floors is easy to do; the flooring can be given the shade needed to fit any room. Some engineered hardwood flooring also has a hand scraped texture. In this situation, re-sanding can be done, although the bevels and some of the scraping will disappear.

Can you stain engineered wood floors without sanding?

As a general rule you can stain your current floor a darker color without issue and have good results (except if they type of wood isn't conducive to dark stain). In some cases you may be able to apply a translucent glaze that can darken the color without a full sanding and refinishing job.

How do you restore prefinished hardwood floors?

Restoring a Worn Finish
If the wood is still in good condition, you can often restore the finish by screening. This is a process of scuff-sanding the finish with a floor buffer and 120- or 150-grit sanding screen and applying a fresh coat.

Can you screen and recoat engineered hardwood floors?


A hardwood floor which has been treated with a wax or oil product is very difficult to screen and recoat, and most times the new coat of polyurethane just won't stick. This even applies to waxed floors where a flooring stripper has been used to take the wax off.

How much does it cost to sand and refinish engineered wood floors?

This will typically cost $1 per square foot, or $225. For a custom refinish job involving sanding the hardwood flooring, and applying stains, water-based or oil-based finishes, and other finishes like those that are acid-cured, expect to pay $3.75 to $5 per square foot, or $850 to $1,125.

Can I sand engineered oak flooring?

Most engineered floors have a wear layer of between 3 and 6mm with a backing of 15-21 mm; on this basis if you are looking at sanding a floor with a 3 mm wear layer it can be sanded up to twice and if it has a 6 mm wear layer it can be sanded up to 4 times.

Can 3/8 Engineered Hardwood be refinished?

Even at 3mm, if the floor is lumpy, you risk sanding through to the ply substrate. Engineered wood flooring is usually 4-8mm and is good for sanding and refinishing.

Can you strip engineered hardwood?

Some say the pre-finished engineered floors can be very difficult to strip down b/c they are thin and can't be re-coated.

Is it cheaper to replace or refinish hardwood floors?


In general, it will almost ALWAYS be less expensive to refinish your hardwood floors. If you replace them, you need to pay for additional wood as well as ripping up and hauling away existing hardwood. Even if you have this, it will still be less expensive then replacing the whole floor.

How many times can you sand engineered hardwood?

An engineered floor with a 3mm wear layer can be sanded and refinished approximately 2 to 3 times over the lifetime of the floor. An engineered floor with a 4mm wear layer or thicker can be sanded and refinished approximately 3 to 5 times over the lifetime of the floor.

Can I refinish my hardwood floors myself?

Hardwood floor refinishing is a fairly simple do-it-yourself project. You may need to use some rented machines for sanding the wood floors, applying stain and adding a protective wood finish to make your hardwood floors look shiny and new again.

Which is better hardwood or engineered flooring?

Engineered wood is easier than solid hardwood as you have a greater range of installation methods, including stapling or nailing, fold-and-lock, or glue. Solid wood flooring is nailed or stapled down. It is never installed on a floating basis.

Can you Restain hardwood floors a different color?

Changing the Color of Your Hardwood. When you refinish your floors, you can change the color of your flooring. Most hardwood floors can be made darker, lighter, redder, or anywhere in between. If your flooring is solid hardwood, it can be sanded and refinished in a different stain for a different appearance.

How hard is it to Restain hardwood floors?


If the scratches don't go all the way through to the wood, you can scuff-sand your floors with a buffer and apply a fresh coat or two of finish. The hardwood floor refinishing process is easier and less expensive than sanding down to bare wood and takes less time. In a few hours your floors will look as good as new.

Can engineered hardwood be resurfaced?

Can engineered floors be refinished? Yes, they can, at least once. Floors with a wear layer less than 2 millimeters thick can tolerate a light scuff-sanding with a buffer. Thicker top layers can be sanded just like solid wood, allowing you to erase deeper scratches and dents.

How long will an engineered wood floor last?

The lifespan of engineered flooring depends on the thickness of the plank: Thinner types last 20 to 30 years, and thicker ones have a lifespan of 40 to 80 years. These projected lifespans may hold true for high-quality engineered flooring, but not so for the many cheaply made engineered flooring products out there.